HPE Proliant DL380 G3

The HP ProLiant DL380 G3 server has the most recent Intel Xeon processors with Hyper-Threading technology, PCI-X expansion slots, PCI Hot Plug, Integrated Lights-Out (iLO), Online Spare Memory support, an embedded Smart Array 5i Plus Controller with an optional transportable battery-backed write cache, a simplex/duplex SCSI backplane, dual integrated Gigabit NICs, an optional hot-plug redundant power and cooling, and quick. Currently available are two new, highly effective processors for the ProLiant DL380 G3: The 3.2GHz Intel Xeon CPU with 2MB of Level 3 cache provides maximum performance for the most demanding workloads. The 2.8GHz Intel Xeon processors improve significantly over the 3.06GHz/512MB CPU with 1MB of Level 3 cache at a cost that won't break the bank. • Integrated Lights-Out (iLO) Management standard on system board • Five Peer PCI Architecture up to 3.2 GHz processors and a 533MHz Front Side Bus • ServerWorks GC -LE Chipset • Integrated Smart Array 5i Plus Controller with optional Battery-Backed Write Cache (BBWC) Enabler option kit • Three available 64-bit PCI-X slots, including two hot pluggable 100MHz slots and one 133MHz slot • Two NC7781 PCI-X Gigabit NICs (embedded) • Support for up to six 1"" Wide Ultra3/Ultra320 SCSI hot plug hard drives or for five hot plug hard drives and one AIT hot plug tape drive • User configurable single/dual channel drive backplane • Internal hot plug capacity 1.80 TB standard (6 x 300 GB 1"" U320 HD) • 400-Watt Hot Plug Power Supply (with optional redundancy) • Hot Pluggable Fans (with optional redundancy) • Sliding rails and cable management arm for easy serviceability and in-rack tool-less access to major components • Automatic Server Recovery (ASR), ROM Based Setup Utility (RBSU), Insight Manager 7, Status LEDs including system health and UID and SmartStart