HPE Proliant DL145 G2

This opteron-based architecture is perfect for cost-conscious small and medium-sized companies, corporate data centres, and large clustered High-Performance Computing (HPC) settings. The PC3200 Double Data Rate (DDR1) SDRAM used in the HP ProLiant DL145 servers operates at 400MHz and has Advanced ECC capabilities. The most recent SDRAM technology is DDR1. Each DIMM transmits SDRAM data on the rising edge of each clock cycle. Transactions are carried out by the memory chip on DDR DIMMs on both the rising and falling edges of the clock cycle, thus doubling the memory bus clock rate yields. The AMD 8132 series chipset, which supports PCI-X, and the NVIDIA CK8-04, which helps PCI-Express, are both used by the ProLiant DL145. Up to two Opteron CPUs, 16GB of PC3200 memory, 133MHz PCI-X bandwidth, and x16 PCI-Express capability are supported by the combination of these chipset implementations. Instead of Rev. CG processors, the AMD Opteron processors used in the DL145 G2 are Rev. E processors. The Rev. E CPUs in the G2 models provide better performance through an increase in the frequency of the HyperTransport technology. The Rev. E process uses HyperTransport technology at a 1GHz frequency. The design of the ProLiant DL145 evolves as server technologies evolve. • The DL145 G2 has a second 133MHz PCI-X low-profile slot • The DL145 G2 has four total USB ports: 2 front and two rear • The DL145 G2 offers a new bezel design with UID for easy identification in large-scale rack deployments • The DL145 G2 only offers support for Rev. E AMD Opteron processors support with 1GH HyperTransport