HPE Proliant BL460c Gen10 Blade Server

Technical specifications:-

Specifications HPE FlexFabric 10Gb 2-port 536FLB FlexibleLOM HPE FlexFabric 20Gb 2-port 650FLB FlexibleLOM

Type Integrated dual-port KR 10Gb FlexibleLOM with FlexFabric (Flex-10, FCoE, hardware-based iSCSI, iSCSI boot, TCP/IP offload engine, and autosensing 1Gb/10Gb Ethernet capability) Integrated dual-port KR2 20Gb FlexibleLOM with FlexFabric (Flex-20, FCoE, RoCE, Tunnel Offload with VXLAN/NVGRE, hardware-based iSCSI, iSCSI boot, TCP/IP offload engine, and autosensing Ethernet speed capability)

Network Processor QLogic 57840S with integrated MAC/PHY Emulex XE-104

Data Transfer Method x8 PCI Express 3.0 x8 PCI Express 3.0

Network Transfer Rate "Two ports, each at 20 Gb/s full duplex; 40 Gb/s aggregate full duplex theoretical bandwidthNOTE:Each port is autosensing 1Gb/10Gb, and can interoperate with 1Gb or 10Gb HPE BladeSystem c-Class interconnect components. Both ports will operate at the same speed.
Each port on the 536FLB adapter transmits from the server at 20 Gb/s (theoretical) full duplex." Two ports, each at 40 Gb/s bi-directional; 80 Gb/s aggregate bi-directional theoretical bandwidth

IEEE Compliance 802.1p, 802.1q, 802.1qau, 802.3ad, 802.3ae, 802.3ap (10GBase-KX4) and 802.3x 802.3ae, 802.1Q, 802.3x, 802.1p, 802.3ad/LACP, 802.1AB(LLDP), 802.1Qbg, 802.1Qbb, 802.1Qaz, 802.3ap

Standard Features "Full hardware offload of iSCSI and FCoE storage protocol processing for highest performance converged Ethernet data and storage networks

Dual-port 10GbE Flex-10 FlexibleLOM network adapter that provides the flexibility to choose the type of LOM to meet growing infrastructure needs

Industry-leading throughput and latency performance

Supports the HPE Flex-10 blade interconnect technology

User configurable bandwidth settings when combined with the 10Gb Flex-10 Virtual Connect module

From 100 Mb/s to 10 Gb/s on up to four ""Physical Function"" NICs per port, in increments of 100 Mb/s for NIC. The combined bandwidth of NICs cannot exceed port bandwidth i.e. 10 Gb

Up to 40 Gb/s bi-directional near line rate throughput

Hardware acceleration and offloads for stateless TCP/IP, TCP Offload Engine (TOE)

Improved small packet performance

Support for Preboot eXecution Environment (PXE)

Integrated PHY and MAC

Supports for SR-IOV

Support for Network Partitioning (NPAR)" "Dual 20Gb ports provide up to 80Gb bi-directional per adapter

Multi-speed adapter operates at either 20GbE or 10GbE

Converges FCoE or RoCE with LAN traffic on a single Ethernet wire

Tunnel Offload support for VXLAN and NVGRE

RDMA over Converged Ethernet (RoCE) for greater server efficiency and lower latency (6125XLG only)

Advanced storage offload processing freeing up valuable CPU cycles

Supports UEFI and legacy boot options

Mixed Storage – supports NIC + FCoE on one port, and NIC + iSCSI on the other

Concurrent Storage - concurrently supports NIC, FCoE, and iSCSI storage functions on the same port (NIC + FCoE + iSCSI)

Industry-leading throughput and latency performance

Supports the HPE Flex-20 blade interconnect technology

Over eight million small packets/s, ideal for web/mobile applications, mobile messaging, and social media

User configurable bandwidth settings when combined with the 20Gb Flex-20 Virtual Connect module

From 100 Mb/s to 10 Gb/s on up to four ""Physical Function"" NICs per port, in increments of 100 Mb/s for NIC

The combined bandwidth of NICs cannot exceed port bandwidth i.e. 20 Gb/s, greater bandwidth with PCIe 3.0

Jumbo Frames support

Supports Wake On LAN (WOL)

Support for Preboot eXecution Environment (PXE)

Support for Microsoft Windows SMB Direct

Optimized host virtualization density with SR-IOV support"

top

Physical specifications

Specification Description

Dimensions (H x W x D) (With bezel) 18.07 x 5.54 x 51.76 cm (7.11 x 2.18 x 20.37 in)

Weight (Approximate) "Maximum: 6.33 kg (14 lb)
(All processors, 16 DIMMs, hard drives, mezzanine cards, and two flash cache batteries installed)"

"Minimum: 4.75 kg (10.50 lb)
(One processor and 2 DIMMs installed)"

top

Electrical specifications

Specification Description

Power "For power specifications including input requirements, BTU rating, and power supply output, refer the HPE BladeSystem c-Class Enclosures QuickSpecs
Click here to access the HPE BladeSystem c3000 Enclosure QuickSpecs .

Click here to access the HPE BladeSystem c7000 Enclosure QuickSpecs .

To review typical system power ratings use the HPE Power advisor online tool
Click here to access HPE Power Advisor online tool ."

NOTE: For optimal cooling and system performance the BL460c Gen10 Server Blade requires the c7000 enclosure to be configured with 10 fans and the c3000 enclosure to be configured with 6 fans.

top

Environmental specifications

Specification Description

System inlet temperature "Operating:
10° - 35°C (50 - 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight

Maximum rate of change is 10°C/hr (18°F/hr). The upper limit may be limited by the type and number of options installed

System performance during standard operating support may be reduced if operating with a fan fault or above 30°C (86°F)"

Non-Operating: (-30°) to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr)

Extended ambient operating support For approved hardware configurations, the supported system inlet range is extended to be: 5° to 10°C (41° to 50°F) and 35° to 40°C (95° to 104°F) at sea level with an altitude derating of 1.0°C per every 175 m (1.8°F per every 574 ft) above 900 m (2953 ft) to a maximum of 3050 m (10,000 ft)

Relative humidity (Non-Condensing) Operating: 10 to 90% Relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature

Non-Operating: 5 - 95% Relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature

Altitude "Operating: 3050 m (10000 ft)
This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 457 m/min (1500 ft/min)"

"Non-Operating: 9144 m (30000 ft)
Maximum allowable altitude change rate is 457 m/min (1500 ft/min)"

‍