HPE Proliant BL460C G8

HPE ProLiant BL460c Gen8 Server Blade - Specifications:-

Physical specifications

Feature Description

Dimensions (H x W x D) 18.07 x 5.54 x 51.76 cm (7.11 x 2.18 x 20.37 in)

Weight (Approximate) "Maximum (All processors, 16 DIMMs, hard drives, mezzanine cards, and two flash cache batteries installed):
6.33 kg (14 lb)

Minimum (One processor and 2 DIMMs installed):
4.75 kg (10.50 lb)"

top

Environmental specifications

Feature Description

Operating temperature 10° to 35°C (50° to 95°F)

Non-operating temperature -30° to 60°C (-22° to 140°F)

Extended ambientoperating support "Minimum: 5° to 10°C (41° to 50°F)
Maximum: 35° to 40°C (95° to 104°F)"

Operating relative humidity 10% to 90% non-condensing

Non-operating relative humidity 5% to 95% non-condensing

Operating altitude 3,050 m (10,000 ft)

Non-operating altitude 9,144 m (30,000 ft)

Acoustic noise "For acoustic noise specifications, please see the HPE BladeSystem c-Class Enclosures QuickSpecs
HPE BladeSystem c3000 Enclosure QuickSpecs:
Click here to access the ""HPE BladeSystem c3000 Enclosure"" .

HPE BladeSystem c7000 Enclosure QuickSpecs:
Click here to access the ""HPE BladeSystem c7000 Enclosure"" ."

top

Technical specifications

Feature Description

Disk drive interface "12 Gb/s SAS (Serial attached SCSI)

6 Gb/s SATA (Serial ATA)"

Server interface x8 PCIe 3.0 provides 8 GB/s maximum bandwidth

Cache memory 1GB flash backed write cache (FBWC) cache standard

Logical drivessupported 64 (With included 1GB cache)

Host memory addressing 64-bit, supporting servers memory space greater than 4GB

RAID support RAID 1 (Mirroring), RAID 0 (Striping), RAID 10

Other "Upgradeable firmware with recovery ROM

Online drive flash (With SAS drives)"

Feature Description

Disk drive interface "12 Gb/s SAS (Serial attached SCSI)

6 Gb/s SATA (Serial ATA)"

Server interface x8 PCIe 3.0 provides 8 GB/s maximum bandwidth

Cache memory None

Logical drivessupported 64

Host memory addressing 64-bit, supporting servers memory space greater than 4GB

RAID support RAID 1 (Mirroring) and RAID 0 (Striping)

Other "Upgradeable firmware with recovery ROM

Online drive flash (With SAS drives)"

Feature Description

Disk drive interface 6 Gb/s SATA (Serial ATA)

Server interface Embedded x4 PCIe 2.0

SAS connectors 2 internal SATA ports

Cache memory None

SAS speed 6 Gb/s SATA links

Logical drivessupported Up to 10 logical volumes (2 Physical drives)

Host memoryaddressing 64-bit, supporting greater than 4GB server memory space

Hot plug support Yes

RAID support "RAID 1 (Mirroring)

RAID 0 (Striping)"

Other Upgradeable firmware with recovery ROM

Feature Description

Type Integrated dual-port KR 10Gb FlexibleLOM with FlexFabric (Flex-10, FCoE, hardware-basediSCSI, iSCSI boot, TCP/IP offload engine, and autosensing 1Gb/10Gb Ethernet capability)

Network processor QLogic 57840S with integrated MAC/PHY

Data transfermethod x8 PCI Express 3.0

Network transferrate "Two ports, each at 20 Gb/s full duplex; 40 Gb/s aggregate full duplex theoretical bandwidth
NOTE:Each port is autosensing 1Gb/10Gb, and can interoperate with 1Gb or 10Gb HPE BladeSystem c-Class interconnect components. Both ports will operate at thesame speed

Each port on the 536FLB adapter transmits from the server at 20 Gb/s(Theoretical) full duplex"

Standard features "Full hardware offload of iSCSI and FCoE storage protocol processing for highestperformance converged Ethernet data and storage networks
Dual-port 10 GbE Flex-10 FlexibleLOM network adapter that provides the flexibility tochoose thetype of LOM to meet growing infrastructure needs:
Industry-leading throughput and latency performance

Supports the HPE Flex-10 blade interconnect technology

User configurable bandwidth settings when combined with the 10Gb Flex-10 virtualconnect module. From 100 Mb/s to10 Gb/s on up to four Physical Function NICs per port, inincrements of100 Mb/s for NIC. The combined bandwidth of NICs cannot exceed port bandwidth i.e.10 Gb

Up to 40Gb/s bi-directional near line rate throughputHardware acceleration and offloads for stateless TCP/IP, TCP Offload Engine (TOE)improved small packet performance

Support for Preboot eXecution Environment (PXE)

Integrated PHY and MAC

Supports for SR-IOV

Support for Network Partitioning (NPAR)"

Feature Description

Type Integrated dual-port KR2 20Gb FlexibleLOM with FlexFabric (Flex-20, FCoE, RoCE,Tunnel Offload with VXLAN/NVGRE, hardware-based iSCSI, iSCSI boot, TCP/IP offloadengine, and autosensing Ethernet speed capability)

Network processor Emulex XE-104

Data transfermethod x8 PCI Express 3.0

Network transferrate Two ports, each at 40 G b/s bi-directional; 80 Gb/s aggregate bi-directional theoreticalbandwidth

Standard features "Dual 20Gb ports provide up to 80Gb bi-directional per adapter

Multi-speed adapter operates at either 20 GbE or 10 GbEConverges FCoE or RoCE with LAN traffic on a single Ethernet wire

Tunnel offload support for VXLAN and NVGRE

RDMA over Converged Ethernet (RoCE) for greater server efficiency and lower latency(6125XLG only)

Advanced storage offload processing freeing up valuable CPU cyclessupports UEFI and legacy boot options

Mixed Storage ? supports NIC + FCoE on one port, and NIC + iSCSI on the otherconcurrent storage ? concurrently supports NIC, FCoE, and iSCSI storage functions onthe same port (NIC + FCoE + iSCSI)

Industry-leading throughput and latency performance

Over eight million small packets/s, ideal for web/mobile applications, mobile messaging,and social media

User configurable bandwidth settings when combined with the 20Gb Flex-20 VirtualConnect module. From 100 Mb/s to10 Gb/s on up to four Physical Function NICs perport, in increments of 100 Mb/s for NIC

The combined bandwidth of NICs cannotexceed port bandwidth i.e. 20 Gb/s

Greater bandwidth with PCIe 3.0 jumbo frames support

Supports Wake On LAN (WOL)

Support for Preboot eXecution Environment (PXE)

Support for Microsoft Windows SMB direct

Optimized host virtualization density with SR-IOV support"

top

Safety certifications

Feature Description

IEEE compliance "FlexFabric10Gb2-port 536FLBFlexibleLOM
802.1p

802.1q

802.1qau

802.3ad

802.3ae

802.3ap (10GBase-KX4)

802.3x" "FlexFabric20Gb2-port 650FLBFlexibleLOM
802.3ae

802.1Q

802.3x

802.1p

802.3ad/LACP

802.1AB(LLDP)

802.1Qbg

802.1Qbb

802.1Qaz

802.3ap"

‍